2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 216Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 216

Assembling KEY 1WasherDrive Gear (R) 2Drive Gear #2 3Circlip 4Reverse Gear Dog 5Spacer 6Washer 7Bushing 8Bearing 9Reverse
making sure the bearing, bushing, and washer are properly positioned; then secure with the circlip5Place the reverse gear
dog onto the countershaft; then secure with the circlip6Place drive gear #2 onto the countershaftNOTE: When installing the
countershaft assembly, account for the washer on each end of the shaftCC686 NOTE: The beveled side of the secondary drive
gear must face upward 2Apply red Loctite #271 to the threads of the output shaft; then secure with the nutTighten nut to
specifications; then using punch, peen the nut Assembling Crankcase Half 1Install the output shaft assembly into the crankcase
making sure the two gears, shim, washer, and nut are properly sequencedCC687 3Apply liberal amount of engine oil to the crankshaft