2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 219Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 219

7From the left side, install the eight case half mm cap screws; then tighten only until snugNOTE: Rotate the shafts back
screws (from steps 7-8) to specificationsNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 11Using
liberal amount of grease, assemble the shift cam stoppers; then install them into the top of the engineCC695 4Using plastic
mallet, lightly tap the case halves together until cap screws can be installed5From the right side, install the mm cap screws;
then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs NOTE: The grease
will hold the springs and cam stoppers in position while installing the assemblies into the engine 6From the left side, install