2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 222Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 222

16Place the V-belt into position on the driven pulley and over the front shaftCD970 13Place the driven pulley assembly into
(threads coated with red Loctite #271)Tighten the nut to specifications 14Slide the fixed drive face onto the shaft15Spread
the faces of the driven pulley by pushing the inner face toward the engine while turning it counterclockwise; then when the
faces are separated, insert wedge (approximately 38 inthick) between the facesRelease the inner face NOTE: At this point,