2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 271Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 271

2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations 2Inspect
Drive 1Insert the drive into the centrifugal clutch housing2Rotate the inner race by hand and verify the inner race rotates
only one directionCC243D 2Drive plate thickness must be within minimum specifications3If the fiber plate tabs are damaged,
the plate must be replaced4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present, replace
the hubInspecting Centrifugal Clutch Shoe 3If the inner race is locked in place or rotates both directions, the drive assembly
must be replacedAssembling Primary Clutch KEY 1234567 1Inspect the clutch shoe for uneven wear, chips, cracks, or discoloration
Pressure Disc Driven Plate Drive Plate Sleeve Hub Primary Gear Assy Washer Washer 737-731A 1Place the clutch hub upside down