2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 288Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 288

7In crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 3-4) until the halves are correctly joined; then
center crankcase components, proceed to Installing Right-Side Components, to Installing Left-Side Components, and to In-
stalling Top-Side ComponentsCC091D Installing Right-Side Components AOil StrainerOil Pump BGear Shift Shaft 3Place the oil
pump into position in the crankcase and secure with the three Phillips-head screws coated with blue Loctite #243Tighten to
specifications 1Place the oil strainer into position beneath the crankcase and tighten securely with the Phillips-head cap
screws 4Place the pin and washer into position on the oil pump shaft, install the oil pump driven gear, and secure with the