2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 293Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 293

2Place the shift-indicator sending unit into position making sure the contacts and springs are inside the case and well-oiled
the starter idle gear pin into the crankcase; then with the beveled side of the idle gear facing the crankcase, install the
idle gear and spacer ! CAUTION It is important that the oil holes in the splined bushing and driveshaft alignIf they are
not aligned, major damage will occur from lack of lubrication 4Place the bushing onto the output shaft; then install the