2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 297Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 297

26Install the inside circlip onto the hilow range shift shaft with the sharp side of the circlip facing the engine; then
the T-handle stop pin into the hi range lever stop plate slot; then slide the shift lever assembly the rest of the way onto
the shift shaftSecure with the outer circlip making sure the sharp side of the circlip faces away from the hilow-range lever
0732-301 NOTE: If the piston rings were removed, install them in this sequence AInstall ring expander (4) in the bottom groove
of the piston; then install the thin oil rings (3) over the expander making sure the expander ends do not overlap 28Place