2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 298Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 298

BStagger the end gaps of the upper and lower thin oil rings according to the illustrationNOTE: Note the direction of the
and seat the cylinder firmly on the crankcase ! CAUTION The cylinder should slide on easilyDo not force the cylinder or damage
to the piston, rings, cylinder, or crankshaft assembly may occur ! CAUTION Incorrect installation of the piston rings will
result in engine damage 1Install the piston on the connecting rod making sure there is circlip on each side and the open
end of the circlip faces upwardsNOTE: The piston should be installed so the arrow points toward the exhaustCC024D 4Loosely
install the two nuts which secure the cylinder to the crankcaseNOTE: The two cylinder-to-crankcase nuts will be tightened