2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 304Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 304

FWhile holding the adjuster dial at the proper clearance setting, tighten the jam nut securely with the valve adjuster handle31Place
place the enginetransmission into the frame; then move it rearward as far as possible2Raise the rear of the engine enough
to engage the front driveshaft into the splines of the front drive output yoke; then slide the engine forward as far as possible
5Install the lower rear engine mounting through-bolt, spacer, and washer; then install the lower front engine mounting through-bolt,
spacer, and washerSecure with the flange nutsTighten to specifications 6Install the upper engine mounting brackets to the
frame with two cap screws; then install the through-bolt and flange nutTighten all hardware to specificationsCD818 3Raise