2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 309Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 309

Secure the ATV on support stand to elevate the wheels ! WARNING Make sure the ATV is solidly supported on the support stand
then remove the storage compartment box8Remove the instrument pod; then remove the front rack and front body panel (see Section
8)9Remove the front V-belt cooling snorkel; then remove the rear V-belt cooling boot 4Remove the four screws securing the
electronics mounting tray; then remove the entire assembly 10Disconnect the alternator lead connector (A); then disconnect
the pick-up coil lead (B) and the speed sensor connector (E) 5Drain the coolant from the cooling system; then drain the oil
from the enginetransmission 11Remove the neutral position connector (F) and reverse position connector (H); then disconnect