2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 312Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 312

24Remove the enginetransmission assembly from the left side of the frameNOTE: Tape over or cap all open hoses, lines, and
for this procedure Removing Left-Side Components ARecoil Starter BWater Pump CCover DRotorFlywheel EStator FStarter Torque
Limiter GStarter ClutchClutch Gear HOil Pump 4Remove the V-belt cover (See Removing Right-Side Components); then remove the
three clutch cover bolts (B) noting the arrow (D) and attach the clutch holding tool (A) 1Remove the four cap screws securing
the recoil starter assembly to the left-side cover; then remove the recoil starterAccount for the gasket2Drain the cooling
system including the coolant reserve tank; then remove the coolant hoses (A), four cap screws (B), and the water pump cover
(C)Account for the gasket 5Hold the clutch stationary while (from the opposite side) loosening the rotorflywheel cap screw