2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 323Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 323

3Remove the cap screws (A) securing the output drive bevel gear housing; then remove the housing (B) NOTE: Check the bevel
no abnormalities are detected, set the assemblies aside for installationDo not remove from housings 4Remove four cap screws
(A) securing the output driven bevel gear housing (B); then tap lightly on the front of the output driven bevel gear shaft