2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 336Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 336

DRIVEN PULLEY ASSEMBLY Disassembling 4Relax the spring by removing the nut and spring holder; then remove the spring seats
bench vise 5Make matching marks (A) and (B) on the movable sheave (C) and stationary sheave (D) to allow installation in
the same position 2Place the driven pulley assembly onto the compressor tool base3Tighten the nut against Spring Holder (pn
0444-162) (C) to compress the springs; then using circlip pliers (B), remove the circlip (A)KX282 6Wipe out excessive grease;