2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 345Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 345

6Select connecting rod big end inserts using the following chart and the markings on the crankshaft and connecting rodBig
(B) and (C) until flush with bore (insert bearing (B) from the outside)Coat all bearings with clean engine oil ATV2082A 5Apply
grease to the lip (A) of the crankshaft oil seal (B); then press the seal in so that it sits mm (0.12 in inward (C) from
the end of the housingATV2073A ATV2081 ATV2074A 7Install the inserts into the connecting rods and caps; then use plastigauge