2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 348Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 348

ATV2083 ATV2086 2Apply blue Loctite #242 to the thread area (C), except tip (D) of left case cap screw (3); then install
ATV2084A 5Check that the crankshaft and driven shaft turn freelyIf any of the shafts don't turn freely, separate the crankcase
halves to locate the problem6Using the bearing driver (A), drive the bearing into the housing until it bottoms out ATV2085
3Install the breather tube (A) on the crankcase fitting aligning the white line on the tube with the mark (B) on the crankcase;
then install the clamp (C) directing the open end toward the left side (D) of the crankcase 7Place the bearing housing into