2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 351Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 351

ATV2092 19Set the dial indicator (A) against the output driveshaft spline groove; then rock the driveshaft slightly until
Driven Shaft 7Driven Bevel Gear Shims ATV2088 Driven Bevel Gear Shims for Backlash Adjustment Thickness 0.15 mm (0.006 in0.2
mm (0.008 in0.5 mm (0.020 in0.8 mm (0.031 in1.0 mm (0.039 in1.2 mm (0.047 in 20Remove the drive bevel gear housing assembly;
then clean all oil from the bevel gearsApply thin even coat of machinist layout dye on the bevel gears21Rotate the driveshaft
several revolutions in both directions while applying resistance to the drive gearNote the drive and coast contact patterns