2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 354Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 354

32To prepare the intermediate shaft chain tensioner (A) for installation, release the stopper (B); then push the rod (C)
on the transmission driven shaft (A) being careful not to jam the splines (B) with the splines in the pulley (C)KX343 33Secure
the chain tensioner assembly (A) to the crankcase with cap screws (B); then tighten to specifications and remove the wire
(C) 34Apply grease to the O-ring (A); then install the cover (B) into the right side of the crankcase with the tapped hole