2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 363Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 363

13Connect the four disconnect plugs as shown; then connect the battery positive cable and starter lead to the starter relay
lead, and oil pressure warning lead; then connect the drive belt failure detector lead and the engine brake control servo
lead to the main harnessConnect the spark plug wiresKX136 12Install the electronics mounting tray with the CDI, starter relay,
and EBC module attached; then secure with four mounting screws 17Remove the tape from the carburetor inlets checking for