2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 371Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 371

9Place the top cover into position; then secure with the Phillips-head screwsTighten securely 7Place the U-ring into the
2Connect the electric choke lead to the wiring harness ! CAUTION It is important to press down on the primer housing until
it contacts the carburetor to make sure the diaphragm lip is properly seated in the groove in the carburetorIf the diaphragm
is not properly seated, leakage will occur 8Place the jet needle, spring seat, and spring into the vacuum piston; then place