2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 380Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 380

INSTALLING REMOVING 1Place the gas tank into position on the frame; then install the two cap screwsTighten securely2Connect
tank cap and tank for leaks, holes, and damaged threadsINSTALLING 1Place the gas tank into position in the frame; then install
the cap screwsTighten securely2Connect the gas hose(s) from the carburetor(s); then connect the fuel gauge connector3Install
the vent hose; then fill the gas tank with gasoline4Turn the ignition switch to the ON position (650 V-Twin) or start the
engine (on other models) and inspect for leakageKEY 1234567Gas Tank Tank Cap Gasket Sender Seal Filter Mounting Plate 891011121314Screw
Hose Clamp Hose Fuel Pump Machine Screw Lock Nut Hose Clamp 151617181920Fitting Grommet Shield Shield Shield Cap Screw 5Install
the rear fenders and rack (see Section 8); then install the seat making sure it latches securely 0739-695 Gas Tank Valve
! WARNING Whenever any maintenance or inspection is made on the fuel system during which there may be fuel leakage, there