2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 386Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 386

INSTALLING Oil Cooler 1Place the cooler into position in the frame2Secure the cooler to the frame with the cap screws and
from the oil cooler located on the back of the radiator2Remove the radiator (see Radiator) in this section3Remove the fan
and fan shroud; then separate the oil cooler from the radiatorINSTALLING ! CAUTION Elevate and secure the hoses to avoid
oil spillage 2Remove the cap screws securing the oil cooler to the frameAccount for grommets 1Place the oil cooler into position
on the radiator and secure with the retainer brackets; then install the fan shroud and fan2Install the radiator (see Radiator)
in this section3Connect the oil hoses to the oil cooler and tighten the clamps securely4Warm up the engine and check for