2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 392Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 392

3Using Seal Removal Tool (pn 0644-072), remove the mechanical seal and the oil seal from the bearing housing CC784 6Using
the seal down until it is fully seated DISASSEMBLING 1Finish removing the two Phillips-head cap screws securing the cover
to the bearing housing; then remove the coverAccount for the O-ring2Remove the E-ring securing the impellershaft to the bearing
housing; then remove the impellershaft 2Place the new mechanical seal into the bearing housing; then tap it down until it
is fully seatedNOTE: large deep-well socket can be used to drive the seal down evenly 3Install the impellershaft assembly