2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 402Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 402

VOLTAGE (Wiring Harness Side) 3When the brake pedal is depressed, the meter must show less than ohmNOTE: If the meter shows
switchcomponent, the connector, and the switch wiring harness for resistance RESISTANCE (Switch Connector) ! CAUTION Always
disconnect the battery when performing resistance tests to avoid damaging the multimeterAR622D 3The meter must show battery
voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, switch, or the main wiring harnessNOTE:
If the meter shows battery voltage, the main wiring harness is good; proceed to test the switchcomponent, the connector,
and the switch wiring harness for resistance 1Set the meter selector to the OHMS position2Connect the red tester lead to
one black wire; then connect the black tester lead to the other black wire RESISTANCE (Switch Connector) ! CAUTION Always
disconnect the battery when performing resistance tests to avoid damaging the multimeter NOTE: The brake lever must be compressed