2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 408Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 408

OIL TEMPERATURE LIGHT VOLTAGE (400) NOTE: The ignition switch must be in the ON position, and the test must be performed
the 400 TBX or the 400 VP modelsNOTE: Prior to testing the speed sensor, inspect the three-wire connector on the sensor harness
(400 FIS500 manual models) or on the speed sensor (500 auto650 H1650 V-Twin models) for contamination, broken pins, andor
corrosion 1Connect the jumper positive wire to the power source terminal on the indicator light connector2Connect the jumper
ground wire to the neutral terminal on the indicator light connector3The neutral position indicator light should illuminateREVERSE
POSITION LIGHT 1Connect the jumper positive wire to the power source terminal on the indicator light connector2Connect the
jumper ground wire to the reverse terminal on the indicator light connector3The reverse position indicator light should illuminateNOTE:
If light fails to illuminate in any one of the indicator light tests, the connector, wiring harness, or bulb must be replacedCD884A