2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 426Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 426

Output-to-Actuator Voltage (650 V-Twin) Speed Sensor Signal Voltage (650 V-Twin) NOTE: This component is located on the right
off the ground; then turn the ignition switch ON2Select DC Voltage on the multimeter (B); then connect the red tester lead
to the pinkwhite wire terminal (5) and the black tester lead to the black wire terminal (10) in the controller (A) ATV2146
Output-to-Speed Sensor Voltage (650 V-Twin) ATV2147 Select DC Voltage on the multimeter (B), disconnect the speed sensor
connector, and turn the ignition switch ON; then connect the red meter lead to the pinkwhite wire terminal (5) and the black
tester lead to the black wire terminal (10) in the controller (A)The meter should read 0.25 DC voltsIf the reading is not