2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 430Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 430

SPECIAL TOOLS Drive System NOTE: Some photographs and illustrations used in this section are used for clarity purposes only
(Only) Internal Hex Socket (48 mm) NOTE: Special tools are available from the Arctic Cat Service Parts Department TROUBLESHOOTING
New Housing 1.1-1.3 kg-m (8-9.5 ft-lb) 3.5-4.3 kg-m (25-31 ft-lb) 5.1-6.3 kg-m (37-45.5 ft-lb) Reassembled Housing 0.9-1.2
kg-m (6.5-9 ft-lb) 2.9-3.5 kg-m (21-25 ft-lb) 4.3-5.3 kg-m (31-38 ft-lb) If noise is heard from the gear case area, it can
be difficult to locate andor diagnoseIf the noise is related to wheel speed, but not to engine RPM, the problem is probably
in the final drive or enginetransmission bevel gear setWhen problem is localized, number of inspections must be made to pinpoint
that problemThe most obvious of the inspections include CV boots, wheel and hub nut tightness, wheel bearing damage, gear
case lubricant contamination, low lubricant level, seal leakage, CV joints, or selector armNOTE: Small metallic particles
will collect on the magnetic drain plug as normal part of break-in and will also give metallic cast to drained lubricantContamination