2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 432Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 432

REMOVING DIFFERENTIAL 1Secure the ATV on support stand to elevate the wheels ! WARNING Make sure the ATV is solidly supported
actuator 5Tighten the remaining cap screws; then connect the electrical plug to the main harness6Turn the ignition switch
to the ON position and check the operation by shifting the selector switch several times7Secure the wiring harness to the
frame with nylon cable tie; then install the inner fender panelKX041 Front Differential (FIS Models) NOTE: To remove the
rear gear case on FIS models, see Rear Gear Case (FIS Models) in this section 6Release the brake lever lockNOTE: It is not
necessary to remove the brake hoses from the calipers for this procedure 7Remove the two brake calipersAccount for the four