2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 437Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 437

4On the 400 FIS500650 H1, install the input shaft into the housing; then install the front boot and secure with Boot Clamp
splines are separated, clean all splines with parts-cleaning solvent and dry with compressed air; then lubricate with recommended
greaseCD112 5On the 400 FIS500650 H1, place the pinion housing with new gasket onto the gear case housing; then secure with