2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 445Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 445

2Using suitable driver, install the needle bearing into the gear case housing making sure the bearing is seatedNOTE: Do
can be performed on rear gear case 1Remove the seal using seal removal tool 3Install the pinion shaft and secure with the
existing 48 mm lock collarTighten to specificationsCC899 2Using press, remove the bearing 4Place punch on the edge of the