2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 452Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 452

7Install the wheel and tighten to specifications8Remove the ATV from the support stand and release the brake lever lock9Check
is properly supported BEFORE removing the shock absorber assemblies VPRear Suspension REMOVING 1Place the ATV on support
stand (positioned just in front of and behind the footrest on each side) so the wheels are off the floor 5Remove the four
cap screws and nuts securing the rear of the swing arm(s) to the axle housing ! WARNING Make sure the ATV is solidly supported