2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 455Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 455

5Place the axle gasket on the axle housingRotate the axle shaft slightly to ensure proper engagement with the gear case
on the axle retainer assembly; then secure with the cap screwsTighten the auxiliary caliper to specifications and the hydraulic
caliper to specificationsCC764 INSTALLING 1Maneuver the axle assembly forward making sure propeller shaft splines engage
properly and the final drive boot is positioned over the drive housing2Place the rear of the swing arm(s) into position on
the axle housings and case; then secure with four cap screws and hex nutsTighten to specifications ! CAUTION Care should
be taken not to damage or kink the brake cablehose when installing the calipers 5Place the gear case panel into position