2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 457Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 457

3Remove the flange nut securing the hub4Remove the brake caliper 3Install the hub assembly onto the shaft CD009 PR243A 5Remove
caliper to specifications 1Clean all hub components2Inspect all threads for stripping or damage3Inspect the brake disc for
cracks or warping4Inspect the hub for pits, cracks, loose studs, or spline wearINSTALLING 1Secure the brake disc to the hub
with the four cap screws coated with blue Loctite #243Tighten to specifications2Apply grease to the splines in the hub 6Tighten
the hub nut (from step 4) to specifications; then install and spread new cotter pin making sure each side of the pin is flush