2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 461Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 461

Shock Absorbers REMOVING 1Secure the ATV on support stand to elevate the wheels and to release load on the suspension ! WARNING
suspension, additional support stands are necessary to support the rear axle when the shock absorbers are removed or damage
may occur 1Place the shock absorber spring over the shock absorber, compress the spring, and install the retainer2Place bushings
and sleeves (where appropriate) into shock eyelet; then install shock with two cap screws and nutsTighten all nuts to specifications
3Remove the two cap screws and nut securing each rear shock absorber to the frame and rear suspensionAccount for bushings
and sleeves from each ! CAUTION Do not tighten the nuts beyond the 4.8 kg-m (35 ft-lb) specification or the shock eyelet
or mount WILL be damaged NOTE: On the fully independent rear suspension models, the rear shock absorber-to-lower A-arm torque