2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 462Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 462

(VPRear Suspension) Swing Arms 2On the right side, place the outer swing arm into position and secure to the axle housing
stand to avoid injuryAF697D 3On the right side, remove the cap screw and lock nut securing the outer swing arm to the axle
housing; then remove the cap screw and lock nut securing the inner swing arm to the axle housingRemove the hose grommets
from the hose guides4Remove the swing arms and note the location of the hose guides on the inner swing arm (for installing
purposes)CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is
necessary 2Remove the cotter pin from the nutDiscard the cotter pin 1Clean all swing arm components in parts-cleaning solvent2Inspect
all swing arm weldments for cracks or unusual bends3Inspect all tubing for cracks or unusual bendsINSTALLING 3Remove the
nut securing the hub4Remove the brake caliperAccount for two cap screws and two 0.76 mm (0.030 in spacer washers 1On the