2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 465Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 465

8Apply grease to the hub and drive axle splines; then install the hub assembly onto the drive axle 13Install the wheel and
to specifications 2Pump up the hand brake; then engage the brake lever lock3Remove the wheel4Remove the cotter pin securing
the hex nut; then remove the hex nutRelease the brake lever lock5Remove the two brake calipers (right side only)NOTE: Do
not allow the brake calipers to hang from their cablehose 6Remove the cap screws and lock nut securing the shock absorber
to the frame and lower A-arm; then remove the shock absorberCD007 11Secure the hub nut (from step 9) to the shaftaxleTighten