2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 466Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 466

4Apply grease on the drive axle splines; then install the hub assembly onto the drive axle AF934 8Slide the hub out of the
cable from the A-arm CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement
is necessary 1Clean all A-arm components in parts-cleaning solvent2Inspect the A-arm for bends, cracks, and worn bushings3Inspect
the frame mounts for signs of damage, wear, or weldment damageINSTALLING 7Compress the hand brake lever and engage the brake
lever lock; then secure the hub nut (from step 5) to the drive axleTighten to specifications8Install new cotter pin and spread
the pin to secure the nut 1Install the A-arm assemblies into the frame mounts and secure with the cap screws and new lock
nutsOnly finger-tighten at this time2Slide the knuckle onto the drive axle and into position on the A-arms; then secure the