2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 474Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 474

5Insert the tie rod ends into the knuckles; then install the slotted nuts and tighten to specificationsLock the nuts with
the inner splash shields (see FrontRear Body Panel in this section)NOTE: Turn the gas tank valve to the ON position only
if starting the engine 3Install the tie rods and secure with the slotted nutsTighten to specifications; then install new
cotter pinsNOTE: If the slots do not align with the holes in the tie rod ends, tighten the nuts just enough to allow installation
of the cotter pins INSTALLING (500650 H1650 V-Twin) 1Place the steering post into position; then secure the lower bearing