2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 480Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 480

3Remove the front rack from the ATVCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in
be taken whenever handling battery 1Place the rack into position on the frame and front fender panelInstall the cap screws
and lock nuts and finger-tighten only2Install the two cap screws and lock nuts securing the rack to the fendersTighten all
hardware securely 3Remove four reinstallable rivets securing the storage compartment to the body; then remove the storage
compartment and the steering post cover Front Bumper Assembly REMOVING 1Remove the two flange bolts and lock nuts securing
the upper bumper supports to the bumper2Remove the through-bolt and lock nut securing the bumper to the frame; then remove
the bumperCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is