2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 486Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 486

NOTE: It may be necessary to rotate the body panel to the right to align the opening with the handlebar 3Make sure the four
andor loose rivets3Inspect for any missing decalsINSTALLING 1Rotate the handlebar to the full-left position; then place the
front body panel over the handlebar and rotate and lower into position 4Install one machine screw and flange nut and four
plastic rivets on each side to secure the front fenders to the footwellsTighten the flange nuts securelyNOTE: If the footwells
have been removed, see Footrests in this section 5Install four cap screws securing the front body panel to the frame and