2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 496Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 496

Hand Brake Lever Master Cylinder Assembly NOTE: The master cylinder is non-serviceable component; it must be replaced as
an absorbent towel around the connection to absorb brake fluidRemove the brake hose from the master cylinder INSPECTING NOTE:
Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Inspect the pin securing the
brake lever for wear2Inspect the brake lever for elongation of the pivot hole3Inspect the reservoir for cracks and leakageAG929
! CAUTION Brake fluid is highly corrosiveDo not spill brake fluid on any surface of the ATV 4Inspect the brake hose for cracks
and deterioration and the condition of the fittings (threaded and compression)5Inspect the brakelight switch for corrosion,
cracks, missing or broken mounting tabs, or broken and frayed wiringNOTE: If the brakelight switch is determined to be not