2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 500Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 500

0732-412 738-422A ! CAUTION Gearshift Pedal (Manual Transmission) Do not attempt to either engage or disengage the front
to LOCK; to disengage the front differential lock, rotate the handle fully clockwise to UNLOCK ATV0078C Drive Selector (FIS
Models) ADJUSTING CABLE The automatic drive selector allows the operator to operate in either 2-wheel drive (rear wheels)
or 4-wheel drive (all wheels)For normal riding on flat, dry, hard surfaces, 2-wheel drive should be sufficientIn situations
of aggressive trail conditions, 4-wheel drive would be the desired choiceTo either engage or disengage the front wheels,
move the switch to the 4WD position or to the 2WD position9-6 1With the differential lock selector in the UNLOCK position,
slide the rubber protector sleeve (A) off the cable near the differential lock selector; then loosen the jam nut (B) and
turn the cable adjuster (C) to achieve 6.35 mm (0.250 in free-travel measured at the end of the differential lock selector