2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 501Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 501

KEY 12345678910111213CD560A 2Select the 2WD position on the front drive selector switch; then turn the ignition switch to
to operate4Turn the ignition switch to the OFF positionTighten the jam nut securely; then install the protector sleeve on
the adjuster assembly 1Remove the E-clip securing the shift rod to the engine shift arm (TBXTRV400500650 H1)On the 650 V-Twin,
remove two cap screws securing the front and rear shift rods together Reverse Shift Lever KEY 12345678910111213141516171819
Handle Clip Plate Nut Lever Spring Axle Nut O-Ring Axle O-Ring Cap Screw Washer Nut Rod End Linkage Bushing Washer E-Ring
TBXTRV400500650 H1 2Remove two cap screws, two self-tapping screws, and three nylon ties securing the left-side splash panel
and remove the panel 0739-701 CD685 3Remove the axle and nut securing the shift lever to the upper shift arm; then remove