2006 Arctic Cat ATVs factory service and repair manual, Page 11Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 11

Either drain the gas tank or add Fuel Stabilizer (pln 0638-165) to the gas in the gas tankRemove the air filter housing cover
light oil to the upper steering post bushing and plungers of the shock absorbersTighten all nuts, bolts, cap screws, and
screwsMake sure rivets holding components together are tightReplace all loose rivetsCare must be taken that all calibrated
nuts, cap screws, and bolts are tightened to specificationsOn liquid cooled models, fill the cooling system to the bottom
of the stand pipe in the radiator neck with properly mixed coolantDisconnect the battery cables; then remove the battery,
clean the battery posts and cables, and store in clean, dry areaStore the ATV indoors in level position Connect the positive
battery cable first; then the neaative Check the entire brake systems (fluid level, pads, etc, all controls, headlights,
taillight, brakelight, and headlight aim; adjust or replace as necessaryTighten all nuts, bolts, cap screws, and screws making
sure all calibrated nuts, cap screws, and bolts are tightened to specificationsCheck tire pressureInflate to recommended