2006 Arctic Cat ATVs factory service and repair manual, Page 56Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 56

20Disconnect the battery ground (negative) cable from the crankcase cover; then disconnect the positive cable from the starter
21Disconnect the following electrical components: voltage regulator, CDI, indicator lights, and the two wire leads for the
oil temperature sensors 18Remove the clamps securing the two oil coolei hoses to the engine; then disconnect the hoses I
NOTE: After disconnecting the oil cooler hoses, plug them to prevent leakage from the cooler 19Disconnect the high tension