2006 Arctic Cat ATVs factory service and repair manual, Page 59Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 59

5 Bend the washer tabs and remove the two cap screw securing the sprocket to the camshaft 7Note the timing marks for installing
crankcase 8Remove the cam chain tensioner by lifting it from the chain cavity; then remove the two lower nuts securing the
cylinder head to the cylinder, one in front and one in rear 6Using an awl, rotate the C-ring in its groove until it is out
of the cylinder head; then remove the C-ringICare should be taken not to drop the C-ring down into the crankcase Remove the