2006 Arctic Cat ATVs factory service and repair manual, Page 76Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 76

2Using the Standard Valve Guide Reamer (pln 0444-017), remove any burrs or tight areas from the valve guide journals Valve
H NOTE: If the valve seat is beyond servicing, the cylinder head must be replaced 1Insert an exhaust valve seat pilot shaft
into an exhaust valve guideSlide an exhaust valve seat grinding tool onto the pilot shaft; then using light pressure on driver
handle and deep socket, grind the exhaust valve seat until within specificationsNOTE: Repeat procedure on the remaining exhaust