2006 Arctic Cat ATVs factory service and repair manual, Page 80Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 80

Incorrect installation of the piston rings will result in engine damage Measuring Cylinder Head Distortion CYLINDERICYLINDER
surface2Inspect the spark plug hole for any damaged threadsRepair damaged threads using "heli-coil" insert3Place the cylinder
head on the surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder head in figure
eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect
any high spots before assembly by continuing to move the cylinder head in figure eight motion until uniform bright metallic
finish is attainedCleaningllnspecting Cylinder 1Wash the cylinder in parts-cleaning solvent2Inspect the cylinder for pitting,
scoring, scuffing, warpage, and corrosionIf marks are found, repair the surface using cylinder hone (see Honing Cylinder