2006 Arctic Cat ATVs factory service and repair manual, Page 90Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 90

INSPECTING OIL PUMP 1Inspect the pump for damage2It is inadvisable to remove the screw securing the pump halvesIf the oil
for this procedureAlso, always start with the original shims on the rear shaft Place the left-side crankcase cover onto the
left-side crankcase half to prevent runout of the secondary transmission output shaftThe clutch hub and the pressure plate
must be seated in the proper positionIf any of the incorrect positions are used, the hub and plate will have clearance between
them and they will not operate 1 NOTE: The primary clutch assembly is now com- Install the secondary driven output shaft
assembly onto the crankcaseMount the indicator tip of the dial indicator on the secondary driven bevel gearWhile rocking
the driven bevel gear back and forth, note the maximum backlash reading on the gaugeAcceptable backlash range is 0.05-0.33