2006 Arctic Cat ATVs factory service and repair manual, Page 103Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 103

4Place the bearing C-ring into position in the crankcase; then install the front shaft (4x4) and rear shaft assemblies.1
assemblies making sure the washer is on the countershaft 8Engage the four forks to the gear shift cam; then install the reverse
shift cam and spacer 6Install the reverse idle shaft with circlip making sure the oil hole in the shaft is facing downward;
then install washer, bushing, reverse idle gear, and washer1 NOTE: The reverse idle gear is directionalCare must be taken