2006 Arctic Cat ATVs factory service and repair manual, Page 106Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 106

7Install the gear shift shaft 9Place the chain into the crankcase; then secure it from the top side with wire for ease of
pin, and oil pump drive gear onto the crank balancer shaft making sure the shoulder of the drive gear is facing inward toward
the crankcase; then secure with the washer and nut (threads coated with red Loctite #271) tightened to specifications CAUTION
must be seated in the proper positionIf any of the incorrect positions are used, the hub and plate will have clearance between